PROJECT 001 / ELECTRONICS + HOME AUTOMATION
Rotary dial
home controller.
An actual mechanical rotary dial, rebuilt as a desktop controller for lights, music and the living-room setup.

How it works.
The White Pages directory gives each action its own number. The Pico W reads the dial contacts and counts the pulses. After two seconds without another digit, it sends the completed number over MQTT. Home Assistant handles the action.
The build combines the original dial mechanism, custom MicroPython firmware, a terminal breakout and a printed enclosure with a removable electronics base.
2077Cyberpunk lighting360Xbox, TV and receiver setup1Normal lighting + silence666Slayer + red lights + TV banner

MECHANICAL DESIGN
Less material.
Same everyday job.
Four smoothly curved supports replace the original slab-sided stand while retaining the existing dial cradle and electronics box. The assembled clear-PETG prototype works without noticeable flex during normal dialing.
With matching solid-print settings, estimated frame filament dropped from 225 g to 139 g: 38% less material. This is a slicer comparison for the upper frame, not the whole enclosure or a strength rating.
BUILD NOTES
A working prototype.
The enclosure and automation are working, with input-switching reliability still being refined. Firmware currently runs MicroPython; ESPHome and wireless firmware updates are a future improvement.
CONTACT
Zion Automation LLC
Tell me what you need built or connected.